STATIC ATTACHMENTS – LONG-LASTING STRENGTH AND DURABILITY FOR ORGANIZED WORK SPACES

If you need somewhere to hang a pulley, tie off a rope, or make any other attachment, permanent or temporary, you need something designed and manufactured for the job.
Harken’s experience with rope handling on yachts has led us to develop a wide variety of attachment point products—from simple eyestraps, to high-strength, lightweight padeyes, to adaptable and removable solutions where required.
For attachments involving human suspension, some of our attachment products are tested and numbered to EN795 standards.
Harken static attachments are ideal in isolated use or as part of larger systems.

Round (S) EN795:2012 Class A  Anchor
Round (S) EN795:2012 Class A Anchor

Part No. IN627

TESTED TO EN795:2012 CLASS A and requirements of BS 8610 Draft May 2017

Uses

The IN627 stainless steel round anchorage point is designed to be permanently installed on a structure so that an anchor device, or personal protective equipment can be attached to it, facilitating safe working at height.

The padeye is appropriate for single-person use for both fall arrest and rope access with an energy absorber to EN 355. It is large enough to allow articulation, will accommodate karabiners, and is cost effective.

  • Please note – actual product will have a serial number and maximum load etched on.

cross image no text

WARNING! – This product is part of a personal fall arrest system.

It is the installers responsibility to ensure the suitability of base materials into which the structural anchor is fixed.

Alterations or misuse of this equipment, or failure to follow the instructions contained in the manual, may result in a fall or failure to arrest a fall leading to serious injury or death.

 

 

DIMENSIONS

Dimensions

mm

Inches

A

57

2.25

C

27

1.1

D

30

1.2

E

30

1.2

F

16

0.6

G

24

1.3

 

SPECIFICATIONS

Weight

118 grams (4.16 oz)

Material

17-4 PH stainless

Maximum rated load

8.75 kN (EN 795)

Breaking load

35 kN

Recommended fasteners

4 x M6 (recommend A2 70 SS)

Certified to EN 795:2012 And BS 8610 Draft May 2017

One person fall arrest and rope access

 

 

Read more
Round (M) EN795:2012 Class A Anchor
Round (M) EN795:2012 Class A Anchor

Part No. IN648

TESTED TO EN795:2012 CLASS A and requirements of BS 8610 Draft May 2017

Uses

The IN648 stainless steel round anchorage point is designed to be permanently installed on a structure so that an anchor device, or personal protective equipment can be attached to it, facilitating safe working at height.

The padeye is appropriate for two person use for both fall arrest and rope access with an energy absorber to EN 355. It is large enough to allow articulation, will accommodate karabiners, and is cost effective.

  • Please note – actual product will have a serial number and maximum load etched on.

cross image no text

WARNING! – This product is part of a personal fall arrest system.

It is the installers responsibility to ensure the suitability of base materials into which the structural anchor is fixed.

Alterations or misuse of this equipment, or failure to follow the instructions contained in the manual, may result in a fall or failure to arrest a fall leading to serious injury or death.

627 IMAGE

DIMENSIONS

Dimensions

mm

Inches

A

76

3

C

33

1.3

D

40

1.6

E

50

1.9

F

29

1.1

G

37

1.4

 

SPECIFICATIONS

Weight

312 grams (11.01 oz)

Material

17-4 PH stainless

Maximum rated load

6 kN (EN795)

Breaking load

70 kN

Recommended fasteners

4 x M10 (recommend A2 70 SS)

Certified to EN 795:2012 and BS 8610 Draft May 2017

Two person fall arrest and rope access

 

 

Read more
Stainless Steel Diamond EN795:2012 Class A Anchor
Stainless Steel Diamond EN795:2012 Class A Anchor

Part No. IN689

TESTED TO EN795.2012 CLASS A and requirements of BS 8610 Draft May 2017.

Uses

The IN689 stainless steel diamond anchorage point is designed to be permanently installed on a structure so that an anchor device, or personal protective equipment can be attached to it, facilitating safe working at height.

The padeye is appropriate for two person use for both fall arrest and rope access with an energy absorber to EN 355. It is large enough to allow articulation, will accommodate karabiners, and is cost effective.

padeye_dimentions

DIMENSIONS

Dimensions

mm

Inches

A

98.4

3.9

B

58.7

2.3

C

73.0

2.9

D

34.9

1.4

E

39.7

1.6

F

22.2

0.9

G

27.0

1.1

 

SPECIFICATIONS

Weight

213 grams (7.50 oz)

Material

Stainless steel

Maximum rated load

15.75 kN

Breaking load

 63 kN

Recommended fasteners

4 x M8 (Recommend A2 70 SS)

Application standard

Certified to EN 795:2012 and BS 8610 Draft May 2017. Two person fall arrest and rope access

 

 

Read more
Eyestraps
Eyestraps

Part No. See table below

Eyestraps

Eyestraps are useful accessories. They form light-duty mounting bases for pulleys, serve as lash-down points, and can be used for fairleads.

Forged eyestraps are extremely strong and their smooth shape won’t chafe line.

 

eyestrap dimentions

 

eyestrap details

 

Eyestrap_table

 

Read more
Folding Padeyes
Folding Padeyes

Part No. See table below

Folding Padeyes

Folding padeyes keep surfaces and accesses clear. They’re ready when you need to attach something but fold safely out of the way when they are not in use.

3206

3206

3207

3207

Folding padeyes_dimentions

Folded padeye tables

 

Read more
Fixed and Removable Padeyes
Fixed and Removable Padeyes

Part No. See tables below

Fixed padeyes

In-deck Loop padeyes are recessed into the mounting surface creating a discreet, low profile design. Lightweight and compact, our padeyes work well with almost any soft-attach pulley, including Black Magic Loop blocks, Snatch blocks and TTR pulleys. U-Bolt padeyes work with soft and hard attachments.

Padeyes are available in mirror-polished 17-4 PH stainless steel to complement any design detail.

C9153_500C9153

C6395_500C6395

Fixed padeyes

Removable padeyes

Harken offers a variety of removable padeyes for pulleys from 57 mm Black Magic, to custom pulleys with maximum working loads of 23,000 kg (57,715 lb). Bases swivel so padeyes align to the load, preventing the reduction of the pulley’s maximum working load. This unique swivel feature is a Harken exclusive.

Removable padeyes_800

 

 

Removable padeyes

 

Read more
Standard Padeyes
Standard Padeyes

Part No. See table below

Standard Padeyes

Padeyes are great for mounting pulleys and are also used as attachment points wherever they are required.

Harken offers a range of stainless steel padeyes. The diamond-shaped padeyes, 668 and 669, are 316 stainless and their shape allows them to be mounted very close together.

627, 629 and 648 padeyes are 17-4PH stainless.

For maximum strength, always align the padeye bails to the load.

627

627

688

688

689

689

Standard padeyes dimentions

Standard padeye table Standard padeye table_dimentions

Read more