» » Round (M) EN795:2012 Class A Anchor

Round (M) EN795:2012 Class A Anchor

Part No. 441.648

TESTED TO EN795:2012 CLASS A

Uses

The 441.648 stainless steel round anchorage point is designed to be permanently installed on a structure so that an anchor device, or personal protective equipment can be attached to it, facilitating safe working at height.

The padeye is appropriate for single-person use with an energy absorber to EN 355. It is large enough to allow articulation, will accommodate karabiners, and is cost effective.

  • Please note – actual product will have a serial number and maximum load etched on.

cross image no text

WARNING! – This product is part of a personal fall arrest system.

It is the installers responsibility to ensure the suitability of base materials into which the structural anchor is fixed.

Alterations or misuse of this equipment, or failure to follow the instructions contained in the manual, may result in a fall or failure to arrest a fall leading to serious injury or death.

627 IMAGE

DIMENSIONS

Dimensions

mm

Inches

A

76

3

C

33

1.3

D

40

1.6

E

50

1.9

F

29

1.1

G

37

1.4

 

SPECIFICATIONS

Weight

312 grams (11.01 oz)

Material

17-4 PH stainless

Maximum rated load

6 kN (EN795)

Breaking load

70kN

Recommended fasteners

4 x M10 (recommend A2 70 SS)

Certified to EN 795:2012

One person fall arrest

 

 

Category:

Specifications

Breaking load

3500 kg (35 kN)

Maximum Rated Load

600 kg (6 kN)

You must carefully read, understand, and follow all of the warnings and instructions in the User Manual provided by Harken in order to avoid an accident. Never, under any circumstances, exceed the maximum rated load.

This product is part of a personal fall-arrest system. It is the installers responsibility to ensure the suitability of base materials into which the structural anchor device is fixed. Alterations or misuse of this equipment, or failure to follow these instructions, may result in a fall or failure to arrest a fall leading to serious injury or dealth.