News Contact Us Product Support
News Contact Us Product Support
27 mm Access Rail / 27 mm Access Rail

27 mm Clear Anodized Access Rail - Pinstop, 3.6 m, For SHCS Fasteners

27 mm Access Rail / 27 mm Access Rail

27 mm Clear Anodized Access Rail - Pinstop, 3.6 m, For SHCS Fasteners

Part No. IN1650.3.6M.CLR

Length (m) 3.6 m

Find a dealer
The Harken Industrial Access Rail system is designed to be used as an adjustable anchorage point for facility maintenance. The system provides freedom of vertical and horizontal movement at height, the ability to lock into position while working, can be used for fall protection, and human suspension. Rails are available in black hardcoat or clear-anodized finishes for maximum corrosion protection. Designed for use with socket head cap screw (SHCS) fasteners.
Specifications Resources Certification
Length (m)3.6 m
Length (ft in)11' 9 3/4" ft in
Fasteners (mm)8 SHCS mm
Fasteners (in)5/16 SHCS in
Mounting hole spacing (mm)100 mm
Mounting hole spacing (in)3 15/16 in
EndstopIN9561.CLEAR
Splice linkIN1651
Manual Access-Rail_R27-Rail_Manual_EN.pdf 1.14 MB Registered product inspectors Official-inspector-register_Access-Rail.pdf 0.21 MB Drawing - DWG IN1650.3.6M.dwg.zip 0.02 MB Product data sheet Curved-rail.pdf 0.06 MB Photo - JPG 1650.CLEAR.jpg 0.03 MB Photo - EPS 1650.CLEAR.eps.zip 0.82 MB 3D drawing - IGS IN1650.3.6M.dxf.zip 0.02 MB Drawing - PDF IN1650.3.6M.pdf 0.02 MB Drawing - DXF IN1650.3.6M.igs.zip 1.53 MB

The 27 mm Access Rail system is independently tested and can be used for human suspension. The rails are EN795.2012 Type D compliant, meet ANSI Z359, and are OSHA compliant. The trolleys are CE certified under EN795.2012 Type B, meet ANSI Z359, and are OSHA compliant. For CE certification this must be used in conjunction with the full CE certified 27 mm Access Rail System.

Note

IN1650 Track for 6 mm fasteners with 50 mm hole spacing available by special order. Contact Harken for lead time.